Why do i need
a Parking Sensor?
Car
Parking Sensor allow you to safely park in the smallest of spaces.
As well as alerting you of parked cars the Parking Dynamics PD1 system can
detect children and low walls, which are out of normal vision. Parking
Sensors are supplied as an easy to fit kit with a choice of sensor
fitting options dependant on your requirements.
If
you have ever had an accident while backing up... How much did that
collision cost you in terms of car repair costs and increases in
the cost of insurance if you made a claim? And have you ever or
almost been injured or have you injured someone else while reversing?
The Parking Dynamics PD1 Sensors will help! Statistics suggest that almost
every driver has an accident while in reverse at one point in their
lifetime, when will it be you?
Each year there are over 300,000 reported reversing accidents in
the U.S. alone and that does not include the hundreds of thousands
of accidents that are never actually reported for wahtever reason.
And according to the Department of Transportation, 27% of car accidents
involve at least one vehicle in reverse. Annually, accidents in
reverse cost insurance companies and individuals over 1.3 billion
dollars and growing year on year.
Read more about the Parking Dynamics PD1 Car Parking Sensor
According to the non-profit organization Kidsandcars.org who are
focused on improving the safety of vehicles of cars and vehicles
state that reversing accidents killed 91 children in 2003, with
82% of these children under the age of 4. This represents a 57%
increase from 2002. And according to the Department of Transportation,
70% of all accidents can be avoided in vehicles that have a collision
avoidance device. The Backup Sensors and Parking Sensors can help
reduce these numbers.
How
does it work?
The system is automatically activated when you engage reverse gear,
so its like having Eyes in the back of your head to help you avoid
any potential collison or crash and help you park with ease. A very
small thin yet robust adhesive antenna sensor that sticks to the
inner side of the rear of the vehicle bumper, that sends and measures
mass magnetic waves which bounce off obstacles and alert you to
their presence. There is an internal audible speaker that gradually
increases the speed and frequency as you approach the object in
3 steps. A continuous tone denotes that you are within (1ft) of
the obstacle.
Read more about the Parking Dynamics PD1 Car Parking Sensor
Do
I need to drill any holes in my car?
No, The Parking Dynamics PD1 car parking sensor system is an adhesive antenna
based easy-fit product.
Do
I need any special tools?
You will need either a soldering iron or crimp set, a screwdriver
and some adhesive tape. You
can find a professional installation service here: InCar-Installer.com
Car Parking
Sensor Direct - Support
- FAQ
- Order
Parking Dynamics PD1
- Parking
Sensor Info - Site
Map