Parking Dynamics PD1: The Manufacturers choice of Car Parking Protection SensorA parking sensor is device that receives a signal or stimulus and responds to it in a distinctive manner. There are many types of sensors used for several purposes, and parking sensor is the sensor that helps you park your vehicle in the most congested areas of around your town. A parking sensor is commonly used in cars and other automobiles and thus also termed as car parking sensor or car reverse sensor or garage car parking sensor. A car parking sensor or car reverse sensor facilitates you park your car in the tightest possible places and dark multi-storey parking lots. A car parking sensor detects objects coming closer to front or rear bumper of your car and indicates it to you. Thus it saves you from banging your car or the car you are parking next to. Parking Dynamics PD1 is an excellent car parking sensor that you can integrate seamlessly with your car without the need for drilling ugly holes like several other sensors on the rear or front. It’ll help you park your car in the slimmest spots proficiently. You’ll not need to look over your shoulder while reversing your car. Parking Dynamics PD1 sensor parking system works on “Electro-Magnetic Technology” by linking up a small control unit that generates a magnetic field and transfers this to a transceiver Adhesive Strip, which is placed the inner side of your bumper. Parking Dynamics PD1 sensor parking system comes in two versions; T123P and T123M.
Parking Dynamics PD1P parking sensor is specially designed for plastic bumpers,
and Parking Dynamics PD1M parking sensor is specially designed for metal
bumpers. The best thing about Parking Dynamics PD1 sensor parking system
is that it doesn’t mar the original look of your bumper. Parking Dynamics PD1 comes with an antenna, a parking sensor, and a speaker. Antenna is a thin, flexible adhesive strip that mounts behind the bumper. The 2.7m adhesive strip ensures 100% bumper coverage and offers a full, all round detection zone. Parking sensor, the brain of the T123, is mounted using the supplied adhesive Velcro either inside the boot or behind the vehicle bumper. Just 20mm in diameter, the speaker can be mounted anywhere inside the vehicle. The speaker is loud enough to be heard even mounted right at the back of the vehicle. Parking Dynamics PD1 sensor parking system works marvelously as garage parking sensor or reverse parking sensor, but it can be used on the front bumper for extreme parking protection. You’ll simply need to wire the PD1 thru an independent switch positioned at the front of the vehicle. Parking Dynamics PD1 sensor parking system gives you the 3 zones of protection; zone One: 0.8 to 05 meters, zone two: 0.5 to 0.25 meters, and zone three: 0.25 to 0 meters. Parking Dynamics PD1 sensor parking system increases the safety of your car as well
as the safety of other road users. It helps to reduce tragic reversing
accidents by up to 75%.
|
